• PRODUCT产品中心

    产品中心
    意大利TRAMEC
    意大利TRAMEC
    意大利TRAMEC成 立于1986年,TRAMEC最初主要生产斜螺旋变速箱,平行轴齿轮箱,轴安装变速箱和右角变速箱。经过多年的发展,TRAMEC的产品范围得到扩展,例 如行星加速计和螺纹减速机。TRAMEC公司为每一台减速器提供精密数据,确保应用系统的高可靠性,模块化的法兰和轴衬设计 适用于任何厂商和形式的需要.这种节省空间的革新方案使皮带轮、小齿轮(与齿条啮合)或杆可以直接与减速机的输出轴连接。

    TRAMEC的主要产品:
    意大利TRAMEC减速机
    X系列螺纹减速机,
    H系列螺纹减速机,
    K系列螺纹减速机,
    XX系列螺纹双联减速机,
    KX系列螺纹双联减速机,
    KK系列螺纹双联减速机,
    T系列斜螺旋减速机,
    Z系列平行齿轮轴产品,
    P系列轴安装变速箱,
    M系列轴安装变速箱,
    R系列直角变速箱,
    RL系列直角变速箱,
    REP系列精度行星减速机,
    EP系列标准行星减速机,
    GN系列带尼龙圈弹性联轴器,
    VSF.2 USC系列输出双联螺纹减速箱,
    N系列速度振动器.
     

    TRAMEC减速机产品描述:
    意大利TRAMEC EP系列,全面替代原来的RDS系列,但是取消了原来RDS系列的FF(法兰输出)形式.
    单级<15 arcminutes 速比系列为3,4,5,7,10
    双级<20 arcminutes 速比系列为9,12,15,16,20,25,28,35,40,50,70,100
    单级<15 arcminutes 速比系列为3,4,5,7,10
    双级<20 arcminutes 速比系列为9,12,15,16,20,25,28,35,40,50,70,100
    单级<15 arcminutes 速比系列为3,4,5,7,10
    双级<20 arcminutes 速比系列为9,12,15,16,20,25,28,35,40,50,70,100
    特点:
    精密的磨齿技术行星齿轮 采用超精密衍磨,使齿轮间配合更加优化。实现低背隙、低噪音、更增加齿轮的使用寿命
    先进的表面处理工艺渗氮钢机壳,增强环境耐受性、耐腐蚀性
    严格的监测流程 TRAMEC公司为每一台减速器提供精密数据,确保应用系统的高可靠性
    模块化的法兰和轴衬设计 适用于任何厂商和形式的电机
    良好的密封设计 长寿命润滑剂无需维护 REP型减速器的技术参数 TRAMEC制造的REP系列行星齿轮减速机具有极高的工作精度及可靠性。 比EP系列精度更高. 单级<4 arcminutes 速比系列为3,4,5,6 双级<6 arcminutes 速比系列为9,12,16,20,24,30,36 三级<8 arcminutes 速比系列为27,36,48,64,80,100,120,144,180,216
    高效率(<=97%),大扭矩(<=450Nm)
     

    RIGHT ANGLE GEARBOXES

    SERIES R

    Built in five sizes with three types of output shaft : hollow, projecting or double-extended. Moreover, an additional output shaft can be installed opposite the input shaft.

    Three input types are available : with projecting input shaft, with pre-engineered motor coupling (bell and joint) and pre-engineered COMPACT motor coupling.

    Gear unit body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to guarantee rigidity and machined on all surfaces for easy positioning. The single lubrication chamber guarantees improved heat dissipation and better lubrication of all the internal components.

    The mechanism of these gearboxes consists of two GLEASON spiral bevel gears with precision ground profile, 16CrNi4 or 18NiCrMo5 UNI7846 steel.

    The use of high-quality tapered roller bearings on all shafts (except for the input sleeve on the compact motor coupling, which is supported by angular ball bearings) ensures long life, and enables very high external radial and axial loads.

    Configurazione
     

    RIGHT ANGLE GEARS

    SERIES RL

    RL Series right-angle drives are designed for industrial applications where rotary power must be transferred between two shafts at right-angles to each other. RL series units are available in 6 different sizes with 2 or 3 outputs and with 1:1 or 1:2 transmission ratios

     

    PARALLEL GEAR SHAFT UNITS

    SERIES Z

    Built in 6 sizes with single reduction stage, in 6 sizes with two reduction stages and in 6 sizes with three reduction stages.

    Two input types are available : with projecting input shaft, with pre-engineered motor coupling (bell and joint).

    Gear unit body in engineering cast iron, EN GJL 200 UNI EN 1561 (71-180) or spheroidal graphite cast iron EN GJS 400-15U UNI EN 1563 (200-225). It is ribbed internally and externally to guarantee rigidity it is machined on all surfaces for easy positioning. The single lubrication chamber guarantees improved heat dissipation and better lubrication of all the internal components.

    The helical spur gears are built in 16CrNi4 or 18NiCrMo5 UNI7846 quench-hardened and case-hardened steel. The first stage is ground.

    The use of high-quality tapered roller bearings on all shafts ensures long life, and enables very high external radial and axial loads.

    The standard hollow output shaft made of steel (shrink disc available on request), the option of mounting an output flange on the side opposite to the input shaft the possibility of mounting a backstop device make these gear units extremely versatile and easy to install.

    Configurazione
     

    PRECISION PLANETARY GEARBOXES

    SERIES REP

    Our gearboxes are manufactured for prevailing utilization in the following applications:

    • Machine tools
    • Machines for woodworking
    • Transfer machines
    • Printing machines
    • Automatic machines for packaging
    • Automation
    • Mechanical hands
    • Silk-screen process machines
    • Linear guides

    The REP series is available in 4 sizes (075, 100, 125 and 150), with 1, 2 or 3 reduction stages, with two or three types of output shaft (AU...) and two types of output flange (FLT and FLQ).

    Housing: made of special nitrided steel to assure strength, high reliability and long life.

    Flanges: input and output flanges made of aluminium and available in several versions.

    Shafts: made of hardened and tempered alloy steel.

    Gears: made of casehardened and tempered alloy steel, with ground toothing.

    Bearings: high quality and suitably sized to assure long life and noiseless working.

     

     

    MOTOINVERTER

    SERIES MOTOINVERTER

    Drivemot – Asynchronous Motors with Integrated Inverter
    Voltage = Single/Three-Phase 230V – Three-Phase 400V 
    Power = 0.10 – 22 KW 
    Control Method: V/F - Sensorless Vector EMC 
    Filter = Integrated 
    Communication Protocols = *CanOPEN – Modbus RS485 – *Profibus-DP

    * = Optional

     

    MOTORS - DRIVE BRUSHLESS

    SERIES BRUSHLESS

    Motors/Drive Brushless
    Voltage = Single-Phase 230V – Three-Phase 400V
    Stall Torque = 0.2 – 115 Nm
    EMC Filter = Integrated
    Communication Protocols = CanOPEN

    IBD – Integrated Brushless Drive
    Voltage = 310 ÷ 750 Vdc
    Stall Torque = 2.8 – 16 Nm
    Communication Protocols = CanOPEN – EtherCAT

     
     
     
    电 话
    地 图
    分 享
    邮 件
    贵州快三